Voltage Protector (under and ove voltage protection protector) can protect circuit and electricity load effectively, reliably and safely, completely inseparable from the self-complex over-voltage protection of a reasonable, reliable and scientific design methods. If you want to achieve effective, reliable and safe protection, can not do without the following design requirements.
1. When the line voltage or under voltage, the automatic cut off the electricity lines, which is the most basic function of the protector.
2. When the line voltage returns to normal, automatically turn on the line, which is known as the self-resetting over-voltage protection device reasons.
3. In order to ensure that the circuit really under voltage or voltage returned to normal, and directly cut off or connected to the circuit, bringing unnecessary trouble. When cutting and turning on the line, it has an inverse time requirement and a delay function when starting or resuming.
4. In order to achieve the reliability of the protector, the line rated voltage of 20% to 200% range, the protector can work properly.
5. Its own rated power consumption is less than 1W, the rated control current is greater than 40A.
6. In order to improve the adaptability of the protector and service life, the control contacts can withstand a variety of overload current and short circuit current capacity.
7. Can withstand a certain lightning or induced discharge shock transient over-voltage.
8. In order to reduce the arcing generated by the protector, the reliability of the protector is affected. The contact has a low arcing function near the zero crossing of the AC current.
9. In order to achieve maintenance-free, the circuit and the program should include the relay coil fault and contact status detection.
To achieve self-reset over-voltage protection of the reliability, effectiveness and security, while the need for effective combination of hardware and software.
Design requirements for Voltage Protector
পাবলিশার্স : TAIXIতারিখ : 2017-06-21দেখেছে : 318
আরও পড়ুন
- Communications industry: optical communications maintain a high level of prosperity
- How should consumers choose small circuit breakers?
- Structural characteristics of load isolation switch
- How to ensure the quality of the electric meter box industry
- What is the difference between disconnectors and isolation switches?
- Isolation requirements for electrical isolation switch
- Working principle of DC circuit breaker
- Development of molded case circuit breakers
- Maintenance and inspection of AC contactor
- Attention should be paid to the installation, application and maintenance of molded case circuit breakers
- How does the overvoltage and undervoltage protection devices work?
- Installation of load isolation switch
- How to deal with abnormal AC contactor
- The comprehensive analysis of benefits of transparent meter box structure materials
- The future development trend of distribution box and distribution cabinet industry